Introduction of graphite carbon additive:

For more information, please visit our website.

With the continuous progress of metallurgical technology, in order to adapt to the intensification of smelting process, the requirements of high quality and efficiency of steelmaking technology, in a ladle recarburizing agent has been widely adopted as a supplementary means, our factory developed the development of molten steel carburetion agent with high fixed carbon content, low content of sulfur and increasing carbon effect is stable, the recovery rate is high, the smoke is less when using, do not pollute environment and is an ideal material for molten steel carburetion.

High quality carburizing agent generally refers to after graphite carburant, in under the condition of high temperature and carbon atoms arranged in graphite morphology, so called for graphitization. Graphite can reduce the content of impurities in the carburant, enhance the carbon content, reduce the content of sulfur and nitrogen. 

 Commonly size

0-10, 1-5, 5-8mm 

 Fixed carbon

 98.5%

 S(Normal)

 0.05%

 S(Low)

 0.03%

 N(Normal)

 700PPM(0.07-0.01%)

Tiantian contains other products and information you need, so please check it out.

 N(Low)

 150-300PPM(0.015-0.03%)

 Moisture

 0.5%

 Ash

 0.5%

 V.M

 0.5%

low sulfur recarburizer as carbon additive

In the smelting process of iron and steel products, due to factors such as smelting time, holding time, and overheating time, the carbon content in the molten iron can not reach the theoretical value expected for smelting. The carbon-containing substances added in order to supplement the carbon content lost during the smelting of steel are called recarburizer.

Graphitized petroleum coke is to place petroleum coke in a graphitization furnace, and after a high temperature of about degrees, the amorphous turbostratic structure carbon crystal of petroleum coke is transformed into hexagonal layered structure crystalline carbon, that is, petroleum coke becomes graphite. It has the advantages of fast absorption, high carbon and low sulfur. Its carbon content is 98-99%, and the sulfur content is less than 0.05% or 0.03%. Another way comes from the cutting waste of graphite electrode. Since the graphite electrode itself is graphitized, its waste can also be used as a recarburizer for steel mills.

The use of recarburizer: the charging method of electric furnace smelting, the recarburizer should be put in together with the charge such as scrap steel, and a small dose can be added on the surface of molten iron. However, it is necessary to avoid feeding molten iron in large quantities, so as to prevent excessive oxidation and cause insignificant carbon increase effect and insufficient carbon content in castings. The amount of recarburizer added is determined according to the ratio of other raw materials and the carbon content.

Huatuo always supply the petroleum coke as carbon additive for gray cast iron,and has in the CPC,GPC etc for more than 10 years, what is more, produce one new type of columnar graphite recarburizer with low sulfur less than 0.5% and carbon more than 98.5%.

Contact us to discuss your requirements of 5-8mm Graphite Carbon Additive(ms,es,it). Our experienced sales team can help you identify the options that best suit your needs.