FLC500 Wavy Replacement Screens: Compatibility, Specifications, and Replacement Guide

FLC500 wavy replacement screens are replacement screening panels with a contoured surface intended for use on compatible shale shaker equipment. The “FLC500” designation is a useful starting point, but it does not by itself confirm that a panel will fit every deck or match every required mesh specification. Before ordering, I recommend checking the shaker and deck details, panel dimensions, fastening arrangement, and separation requirements against the proposed screen. At Yuanpeng, we use those details to help B2B buyers assess compatibility and request a product quotation with fewer avoidable specification gaps.

View Details

Key takeaways

Confirm the complete shaker model and screen-panel arrangement rather than relying on “FLC500” alone.
Compare the panel’s length, width, edge or hook configuration, and support contact points with the installed screen.
Specify mesh or separation requirements alongside the panel type; a matching frame does not guarantee a matching screening result.
Share photos, drawings, or a sample reference when asking for a quote, and confirm price, MOQ, and lead time for the exact configuration.

Who this guide is for

This guide is for drilling-fluid service companies, drilling contractors, equipment distributors, and procurement teams sourcing replacement screens for FLC500 shaker applications. It is also useful for maintenance teams that need to identify a screen before an unplanned replacement becomes urgent. I focus on the checks that help buyers describe what they need and evaluate whether a proposed screen is a reasonable match. Final compatibility should be confirmed against the specific shaker configuration and supplier documentation.

What is an FLC500 wavy replacement screen?

An FLC500 replacement screen is a screening panel identified for a particular FLC500-type shaker application, while “wavy” generally describes a contoured or raised screen surface rather than a flat profile. The panel separates solids from drilling fluid as material moves across the shaker deck. Its actual fit and screening behavior depend on construction details, mesh specification, deck support, and operating conditions. Buyers should therefore treat the product name as an identification clue, not a complete technical specification.

What the wavy profile may mean in practice

A contoured panel can present more surface profile within the available deck area than a flat panel, but the practical effect depends on the screen design and the material being processed. It should not be assumed that every wavy screen increases capacity or improves separation in every application. The right comparison is the screen’s verified construction and performance in the buyer’s operating conditions. If a supplier makes a performance claim, ask which screen configuration and operating basis support it.

Compatibility: what to verify before ordering

Compatibility is a combination of mechanical fit and screening suitability. A screen may have the correct product family name yet differ in dimensions, edge construction, fastening method, or mesh opening. I recommend comparing the proposed replacement with the screen currently installed, the shaker documentation, or a confirmed drawing. If those references disagree, resolve the discrepancy before purchase rather than assuming one is correct.

Use a practical compatibility checklist

Shaker identification: Record the equipment manufacturer, model, and any model revision or deck variation shown on the machine or documentation.
Panel dimensions: Measure the full panel length and width, and note any shaped edges or locating features. For unit conversion, 1 inch equals 25.4 mm; keep the original measurement units visible when sharing dimensions.
Fastening and support: Identify how the screen is secured and where it contacts the deck. Compare hooks, clamps, seals, support bars, or other visible interfaces with the replacement design.
Deck arrangement: Note the number and orientation of panels on the deck, plus any special position-specific requirements.
Screening requirement: State the desired mesh or separation target and the fluid or solids conditions relevant to your operation.

When recording mesh information, distinguish the opening size from the wire diameter or mesh designation, because these are not interchangeable descriptions. One millimetre equals 1,000 micrometres, and 1 micrometre equals 0.001 millimetre; these conversions can help when comparing specifications written in different units. A supplier should confirm how its stated mesh value is defined and whether it refers to an opening, a mesh count, or another convention. If the existing panel has no readable marking, send clear photographs and request identification support instead of guessing.

If you are looking for more details, kindly visit Yuanpeng.

Specifications and material options

There is no single specification that safely describes every FLC500 wavy screen. A purchase specification should identify the intended equipment and panel fit, screen profile, mesh or separation requirement, construction materials where relevant, and quantity. Ask the supplier to state which details are confirmed and which remain assumptions. This makes quote comparison more useful and reduces the risk of ordering a screen that matches the name but not the requirement.

Information to include in a purchase specification

Equipment model and deck or panel position.
Panel dimensions and fastening or edge style, preferably supported by a drawing or photographs.
Required mesh designation, opening target, or reference screen part number.
Material or construction preference, if specified by your operating or procurement requirements.
Order quantity, destination, requested delivery window, and any packaging or documentation needs.

Material selection should follow the application and the buyer’s documented requirements, not an assumption that one material is best for all drilling fluids. Ask about the screen’s construction and available options, and confirm that the proposed choice aligns with the intended operating environment. If you have a current screen that performs acceptably, sharing its specification can provide a practical baseline. Where the specification is incomplete, request a written confirmation before approving production.

How to choose the right replacement

Identify the installed equipment. Photograph the shaker nameplate and the complete deck, and record the model information visible on the unit.
Document the existing screen. Measure the panel, photograph its edges and fastening points, and capture any printed or stamped markings.
Define the separation need. Provide the mesh or opening requirement and describe the material being screened. Do not select a mesh solely by copying an unclear label.
Ask the supplier to confirm fit. Send the equipment details and screen references, then request written confirmation of the proposed configuration.
Review the commercial terms. Confirm the quoted quantity, MOQ, unit price, production or dispatch lead time, packaging, and shipping basis.
Check the delivered product. Before installation, compare the received screen’s identification and visible dimensions with the approved specification and the deck interface.

Common ordering mistakes

A frequent mistake is ordering from the FLC500 label alone without checking panel dimensions or the fastening arrangement. Another is specifying mesh count while leaving the intended opening or separation requirement unclear. Buyers can also overlook whether all panels on a deck use the same specification or whether particular positions differ. To prevent these errors, keep the approved drawing or written specification with the purchase order and ask the supplier to flag any unresolved details.

Pricing, MOQ, and lead time

Pricing for FLC500 wavy replacement screens depends on the confirmed design, mesh or separation specification, material, order quantity, and delivery destination. MOQ and lead time are supplier- and order-specific, so I would not rely on a generic estimate as a commitment. Request a quotation based on the complete specification and ask whether the quoted lead time begins after technical approval, payment, or another defined step. If the requirement is urgent, state the needed delivery date and ask the supplier to confirm feasibility in writing.

Supplier evaluation checklist

A reliable sourcing process depends on clear technical communication as well as price. Check whether the supplier can explain what information is needed to verify compatibility and whether the quotation identifies the screen configuration being offered. Ask how changes to dimensions or mesh requirements affect price and timing. Before placing an order, make sure both parties have the same written description of the product.

Does the supplier review equipment details, dimensions, and fastening interfaces?
Does the quotation clearly describe the screen type and requested mesh or opening specification?
Are MOQ, price basis, production timing, shipment terms, and packaging stated?
Can the supplier identify assumptions that still require buyer confirmation?

Conclusion and next steps

To choose an FLC500 wavy replacement screen, verify the equipment and deck, match the panel dimensions and fastening interfaces, and define the required mesh or separation target. The FLC500 name alone is not enough to confirm interchangeability, and exact specifications should be checked against the machine, a reliable drawing, or the existing panel. Prepare photographs, measurements, and operating requirements before requesting a quote. Yuanpeng can review those details and help you clarify the proposed configuration, MOQ, and lead time for your B2B sourcing request.