Login

Nov. 17, 2026
Select an FGD slurry pump by matching its hydraulic duty, wet-end materials, and configuration to the actual limestone or gypsum slurry—not by choosing on flow rate alone. We recommend confirming required flow and total head, solids concentration and particle size, slurry chemistry, temperature, and operating pattern before requesting a quotation. At RITONCASTING, we use these process details to assess pump type, impeller, casing, and wear-part material options. The result is a more useful specification for comparing suppliers and reducing the risk of premature wear or inadequate performance.
Click here to get more.
This guide is intended for plant engineers, EPC contractors, maintenance teams, and procurement professionals sourcing pumps for flue gas desulfurization (FGD) systems. It focuses on limestone preparation, limestone slurry transfer, gypsum slurry handling, and related process duties. These services can differ substantially, so a pump selected for one point in the circuit may not be suitable for another. Use the guide to build a project-specific inquiry rather than as a substitute for a hydraulic review.
An FGD slurry pump moves a liquid mixture containing suspended solids through process piping. In a wet limestone-gypsum desulfurization system, slurry may include limestone particles, reaction products, gypsum crystals, and process water. The mixture’s solids content, particle size, abrasiveness, and chemistry influence hydraulic performance and wear. Pump selection therefore needs both process data and mechanical considerations.
Common duties include transferring prepared limestone slurry to an absorber, circulating slurry within process equipment, and moving gypsum slurry toward dewatering or handling equipment. These duties may call for different flow rates, heads, solids conditions, and operating schedules. A circulation duty, for example, should be evaluated at its specified operating point and system conditions rather than assumed to match a transfer pump. Identify the exact service and installation location when sharing a duty with suppliers.
Many FGD slurry applications use centrifugal slurry pumps, but the appropriate configuration depends on the duty and installation. Horizontal pumps can be considered where the layout allows accessible floor-mounted equipment, while vertical arrangements may suit certain sump services. The selection should account for suction conditions, available space, maintenance access, and the process connection arrangement. Confirm these details on the project datasheet or installation drawing.
Wetted components such as the impeller, casing liner, and throatbush are exposed to slurry and may require different material choices. High-chrome white iron is commonly considered for abrasive slurry service, while elastomer-lined options may be considered for certain particle and chemical conditions. Neither material is a universal solution: particle size and shape, solids concentration, temperature, chemistry, and the possibility of tramp material all matter. Ask suppliers to explain the basis for their recommendation and identify which components are offered in each material.
Provide the required flow rate and total dynamic head, along with suction conditions and the piping arrangement. Describe the slurry using solids concentration by weight, particle-size distribution or maximum particle size, slurry density if known, pH, and operating temperature. Also state whether duty is continuous or intermittent, whether the process has variable operating points, and what drive or electrical constraints apply. Where laboratory or process data are unavailable, clearly label estimates so they are not mistaken for confirmed values.
| Selection input | Example format | Why it matters |
|---|---|---|
| Flow and head | 100 m³/h at 30 m total head (illustrative only) | Defines the requested operating duty for hydraulic review. |
| Solids concentration | 20% by weight (illustrative only) | Helps describe the slurry load and assess the application. |
| Maximum particle size | 2 mm (illustrative only) | Supports review of impeller passage and wear-part suitability. |
The figures in the table are examples of how to present data, not recommended FGD operating values or a pump performance guarantee. Actual requirements should come from the process design or measured operating conditions. If slurry density, particle distribution, or head losses are uncertain, identify the uncertainty and ask for confirmation before finalizing the pump. A supplier cannot reliably compare options from a flow rate alone.
Start by naming the service, such as limestone feed, absorber circulation, or gypsum transfer. State the normal, minimum, and maximum operating conditions where these are known, and indicate how often the pump operates away from its normal point. Include the required flow and total head, not only the pump discharge pressure. This helps the supplier understand the system duty rather than just the equipment connection.
Link to RITONCASTING
Provide the best available information on solids concentration, particle size, density, temperature, and chemistry. Clarify whether the slurry properties change during startup, shutdown, or different process stages. Gypsum crystals and limestone particles may have different handling implications, so avoid using “FGD slurry” as the only description. If the data are incomplete, request a preliminary review and list what must be confirmed before purchase.
Ask the supplier to identify the proposed operating point, pump speed, motor arrangement, and relevant performance information for the stated slurry conditions. Confirm suction conditions and review whether the installation provides adequate access for inspection and replacement of wear components. Check that the offered configuration matches the site’s piping, foundation, coupling, and drive requirements. Any assumptions used in sizing should appear in the quotation or technical proposal.
Compare materials by component rather than by a single label such as “abrasion resistant.” Ask which materials are proposed for the impeller, casing or liner, and other wetted parts, and what operating assumptions support that selection. Review the expected inspection and replacement approach without treating estimated service life as guaranteed. Keep a record of the initial material configuration so future maintenance observations can inform later orders.
FGD slurry pump pricing depends on the selected configuration, size, materials, drive, accessories, and project documentation requirements. Minimum order quantities and delivery schedules can also vary by supplier, product scope, and the availability of components. We recommend requesting a quotation that separates the pump, motor, optional accessories, recommended spares, and any engineering or inspection services. Ask the supplier to state the quotation validity, delivery basis, and schedule assumptions in writing.
A low initial purchase price does not by itself indicate the lowest lifecycle cost. Compare the scope of supply, wear-part material, maintenance access, spare-part availability, and technical support alongside the price. If the project schedule is critical, confirm which items are included in the stated lead time and when the schedule begins. Avoid comparing offers with different duty assumptions or incomplete material specifications.
Request clarifications when an offer omits the slurry basis or uses generic material descriptions. Ask each bidder to respond to the same duty data and scope so you can compare proposals consistently. For a replacement pump, share the existing nameplate, dimensions, drawings, and operating history where available. These details can help a supplier assess interchangeability, but they should not be treated as proof that the old pump’s original selection was correct.
One frequent mistake is selecting a pump from flow alone while overlooking total head, suction conditions, and slurry properties. Another is choosing a wet-end material based only on a broad description of the slurry, without particle or chemistry information. Buyers may also overlook maintenance access, spare-parts planning, or differences in supplier scope. A complete datasheet and written assumptions help reduce these gaps before an order is placed.
The right FGD slurry pump for limestone or gypsum service is the one matched to the actual process duty, slurry characteristics, installation, and maintenance plan. Begin by gathering flow, total head, solids concentration, particle size, temperature, chemistry, and operating schedule; then request a proposal that explains hydraulic assumptions and component materials. The example figures in this guide are illustrative only and should not be used as a design basis. Send your project datasheet or available operating information to RITONCASTING for a product and configuration discussion tailored to your application.
The company is the world’s best FGD Slurry Pump supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
3 0 0
Join Us

Comments
All Comments ( 0 )