Oil seals play an important role in engines, hydraulic systems, pumps, gearboxes and machinery. They are designed to prevent lubricants or other oils from leaking out of parts while also preventing dirt and debris from entering parts.
Dingtong contains other products and information you need, so please check it out.
Shafts, for instance, often feature an oil seal. Without this otherwise simple mechanical seal, oil will likely leak out, leaving the shaft susceptible to friction-related wear and tear. Whether you’re planning to use it on a shaft or any other part, however, there are several things you should consider when choosing an oil seal.
Diameter
Oil seals are available in different sizes. By considering the diameter, you can choose an oil seal that fits perfectly around the part with which you intend to use it.
Keep in mind that most oil seals have an inner diameter and outer diameter. The inner diameter represents the width from the inner edge of an oil seal to the inner edge on the opposite side. The outer diameter represents the width from the outer edge of an oil to the outer edge on the opposite side. Therefore, the outer diameter will always be wider than the inner diameter.
Material
You should consider the material when choosing an oil seal. Oil seals must be able to withstand regular exposure to fluids, which may be accompanied with heat and pressure. If a seal is made of weak or low-quality materials, it may fail to create a tight seal. Fortunately, you can find oil seals in many effective and high-quality materials, such as FKM, silicone, polyacrylate and Nitrile Buna-N 70 durometer compound.
FKM is a type of fluorocarbon-based fluoroelastomer that boasts one of the widest temperature ranges and chemical resistance. Silicone is an elastic synthetic material consisting of silicon, oxygen, carbon and hydrogen. Polyacrylate is a type of highly durable polymer consisting of acrylic acid. Finally, Nitrile Buna-N 70 durometer compound is a versatile and effective seal material that’s compatible with many other materials.
Temperature Range
Don’t forget the temperature range when choosing an oil seal. Different types of seals have different temperature ranges. Some of them can handle higher temperatures than others, making them ideal for applications involving a lot of heat.
As previously mentioned, FKM seals have one of the widest temperature ranges. They can typically handle temperatures as low as minus 40 degrees Fahrenheit and as high as 400 degrees Fahrenheit. Silicone seals also have a wide temperature range of minus 90 degrees Fahrenheit to 340 degrees Fahrenheit. Polyacrylate seals have a slightly narrower temperature range of minus 30 degrees Fahrenheit to 300 degrees Fahrenheit, followed by Nitrile Buna-N 70 durometer compound at minus 65 Fahrenheit to 250 degrees Fahrenheit.
The group of oil seals used in dynamic applications include radial shaft seals that seal a rotating shaft around its circumference. They are also known as lip seals, but in this blog we will use the term oil seals.
Usually, these oil seals are used to seal lubricating oil or grease and contain it within the application, so that moving parts such as bearings are continually supplied with enough lubrication. However, such seals are also used for sealing other liquids, gases, and solids, such as powders or granules.
All are fitted with a spring to preload the sealing lip. All these types are for non-pressurised or low-pressure applications up to 0.5 bar for diameters of a limited size. For diameter of 500 mm or more, the maximum pressure is 0.1 bar. For higher pressures, special types or PTFE lip seals can be used.
ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.
ERIKS type GV (type C according to DIN) is equivalent to type M, but is a heavy-duty version with a double metal casing. This can be a useful solution with larger diameters in more demanding applications. There is also a version of this type with a dust lip; the GVST (type CS according to DIN).
ERIKS type R (type A according to the DIN standard) is identical in shape to type M, but has a rubber outer case with metal reinforcement on the inside. The rubber creates a good seal in the housing, even if the housing has suffered minor damage or is not in its best condition for other reasons. The RST version has a dust lip. These types are often chosen to replace a type with a metal outer case because they are easier to install and can cope with minor damage to the groove, such as scratches.
ERIKS also supplies the types GR and GRST. These are virtually identical to the types R and RST, except in this case the metal inner ring is also completely encased in rubber. ERIKS uses FKM rubber here as standard, so these seals are ideal for use in acidic environments.
An overview of the different standard types of oil seals and their main characteristics is shown below.
Outer case
The metal used in the outer case of oil seals is usually made of carbon steel. Upon request, and depending on quantities, a different type of steel (such as stainless steel) can be used.
Want more information on Mechanical Oil Seal? Feel free to contact us.
The quality of the rubber or rubber fabric used to make an outer case is the same as the quality of the rubber sealing lip. Fabric reinforced rubber is, as the name suggests, rubber reinforced with a fabric.
Spring
Standard springs are made of carbon steel. We use stainless-steel springs for our GR and GRST oil seals made from FKM rubber. In some rare cases, an O-ring is even used as a spring element. Standard PTFE lip seals are not fitted with springs.
Sealing lip
The sealing lip is always made of a rubber or synthetic material. For oil seals with a rubber outer case (R, RST, GR, GRST), the rubber quality of the sealing lip and the outer case are the same.
The material of the sealing lip is chosen according to the liquid to be sealed and the rotational speed. For larger shafts, an NBR sealing lip can cope with surface speeds of up to 10-12 m/s, while an FKM lip is suitable for speeds of up to 35-38 m/s.
Nitrile Butadiene Rubber (NBR, nitrile)
NBR, also known as nitrile rubber or nitrile, is the most popular material for an oil seal because of its good resistance to many oils and greases, such as mineral grease and hydraulic oil. Depending on their composition, synthetic oils and greases, such as those based on glycol, can damage NBR rubber materials. Depending on the amount of glycol, a PTFE lip seal may be the best choice. NBR is also unable to cope with contact with acids and solvents. The rubber is suitable for oil and grease at temperatures from -35 °C to 100 °C.
Most ERIKS oil seals, such as the types M, MST, R and RST, are made of NBR as standard.
Fluorine rubber (FKM, Viton™)
FKM or FPM, which is in well-known brand Viton™, can withstand higher liquid temperatures of up to 180 ˚C. FKM is highly resistant to strong acids and bases, as well as to synthetic oils and greases. Glycol-based oil and grease, however, can also damage FKM.
Because of the higher temperature resistance of FKM, this material is also chosen for applications where higher speeds play a role, which raise the temperature at the sealing lip considerably. Usually, using FKM will result in a longer life than using NBR. This compensates the higher price of FKM compared to NBR, as an FKM does not have to be replaced as frequently. The low temperature resistance of standard FKM is limited to -15 ˚C.
Polytetrafluoroethylene (PTFE, Teflon®)
PTFE, which is used in the well-known brand Teflon®, is less commonly used, but it is the preferred material for specific rotating seals in the chemical, food and pharmaceutical industries. This material is notable for having a very low frictional resistance and the best chemical resistance. It can also withstand a very wide range of temperatures in these types of seals; -80 ˚C to 200 ˚C. The shafts on which oil seals with PTFE lips are used require a harder and finer finish. Something like an axle sleeve can also be used to meet this requirement.
EPDM
EPDM oil seals are less common. They are used in solvent, hot water and steam applications, EPDM resists low temperatures down to -50 °C and UV radiation well. Some types of EPDM are also suitable for higher temperatures up to +150 °C. EPDM oil seals are usually available upon request.
VMQ (silicone)
VMQ, also known as silicone, is also used for oil seals, but this is less common because the mechanical strength of VMQ is low and this material has poor wear-resistance This makes it less suitable for dynamic applications, but it can withstand fairly low and high temperatures from -60 °C to 200 °C. Many types of VMQ are also suitable for contact with pharmaceutical and food products, so VMQ is an option worth considering. VMQ oil seals are usually available on request.
The company is the world’s best industrial oil seal manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Comments
All Comments ( 0 )