Login

Your Position: Home > Communication Cables > 38/66kV High Voltage Cable Specifications and Selection Guide

38/66kV High Voltage Cable Specifications and Selection Guide

Author: Fayella

Nov. 18, 2026

38/66kV High Voltage Cable Specifications and Selection Guide

To select a 38/66kV high voltage cable, first confirm the system voltage and highest equipment voltage, then define the conductor, insulation, metallic screen, water-blocking, armour, and outer sheath requirements for the installation. The notation 38/66 (72.5) kV commonly identifies the rated voltage between conductor and earth, between conductors, and the highest system voltage for the equipment, respectively; confirm the required designation against the project specification and applicable standard. The right construction depends on the route, installation method, operating conditions, and utility or project requirements—not voltage class alone.

View Details

This guide is for utility engineers, EPC contractors, procurement teams, and distributors preparing a technical specification or request for quotation. We explain the main cable components, how to match options to an application, what information to send suppliers, and which commercial factors to review before ordering.

Key Takeaways

  • Confirm the required voltage designation, applicable standard, and system conditions before comparing offers.
  • Choose conductor material and cross-section based on ampacity, voltage drop, short-circuit duty, route conditions, and project calculations.
  • Specify screens, water-blocking, armour, and sheath according to the installation environment and fault-current requirements.
  • Request a technical datasheet, construction details, applicable test documentation, and clear commercial terms from each supplier.

Basic Concept: What Is a 38/66kV Cable?

A 38/66kV cable is a high-voltage power cable designed for use in systems with a nominal voltage designation of 38/66 kV, subject to the project’s specified voltage category and standard. A typical design uses a conductor, conductor screen, XLPE insulation, insulation screen, metallic screen, and protective outer layers. The exact construction may vary with the cable standard, installation conditions, and buyer’s requirements.

Common cable components

  • Conductor: Copper or aluminium, selected according to electrical performance, installation, and project requirements.
  • Conductor and insulation screens: Semiconductive layers that help provide a controlled interface around the insulation system.
  • Insulation: XLPE is commonly specified for high-voltage cable designs. The required insulation thickness and construction must match the designated voltage class and standard.
  • Metallic screen: Typically made from copper wires, copper tape, or a specified combination. Its design must account for earthing and the anticipated fault-current duty.
  • Water-blocking and protective layers: Optional or project-required features can help limit moisture migration or protect the cable during installation and service.
  • Outer sheath and armour: Selected to suit the route, mechanical exposure, environmental conditions, and installation method.

XLPE cable designs are often specified with a maximum continuous conductor operating temperature of 90°C, but the permitted value must be verified for the selected product, standard, and operating conditions. The actual current rating is not determined by conductor size alone. Installation method, ambient or soil conditions, grouping, thermal resistivity, and loading profile can all affect the rating.

Specifications to Define Before Requesting a Quote

Voltage, standard, and system data

State the full voltage designation required by the project, including the highest system voltage where applicable. Confirm the applicable cable standard and any utility, owner, or national requirements rather than assuming that all 38/66kV designs are interchangeable. Also provide the system frequency, such as 50 Hz or 60 Hz, and relevant earthing and fault-level information.

Conductor and electrical performance

Specify copper or aluminium and identify the required conductor cross-section, or provide the load and installation data needed for engineering review. A project may evaluate options such as 400 mm² or 630 mm², but these are examples rather than universal recommendations. The final selection should be checked against ampacity, voltage drop, short-circuit withstand, cable pulling constraints, and the design conditions of the route.

For a credible comparison, ask suppliers to state the conductor construction, electrical characteristics, and assumptions used for any rating figures. If the cable will be installed in a group or in a thermally restrictive environment, include those details in the enquiry. Avoid comparing current ratings that were calculated using different installation assumptions.

Screen, water protection, armour, and sheath

Define the metallic screen material and cross-section based on the project’s earthing arrangement and fault-current requirements. For routes exposed to moisture, ask whether longitudinal or radial water-blocking is required and specify the intended protection level in the project documents. For direct burial, ducts, tunnels, or industrial routes, evaluate mechanical protection and sheath material against the expected hazards and environment.

Where the route includes corrosive conditions, UV exposure, fire-performance requirements, or special chemical exposure, identify these requirements explicitly. Do not rely on a general description such as “heavy duty” to define cable performance. Request the construction schedule and relevant technical evidence for each required feature.

Match the Cable to the Application

Underground and duct installations

For buried or ducted routes, consider pulling tension, bend radius, soil thermal conditions, water exposure, and the possibility of damage during installation. Confirm whether armour is necessary or whether the civil design provides sufficient protection. The cable design, jointing accessories, and installation method should be reviewed as a coordinated system.

With competitive price and timely delivery, Zhongdong Cable Co., Ltd. sincerely hope to be your supplier and partner.

Substations and industrial facilities

Substation and industrial projects may have defined fault levels, bonding arrangements, fire-performance requirements, or restricted cable routes. Provide the supplier with the route layout, cable length, termination interface, and project-specific requirements. If cables will be installed in parallel, ask for guidance on the data required to verify current sharing and installation clearances.

Renewable energy and utility connections

For renewable generation or grid connections, the cable specification should reflect the connection voltage, route environment, operational profile, and network owner’s requirements. A long route may make voltage drop, charging current, and reactive compensation relevant to the wider system design. These system-level checks should be performed by the project’s qualified electrical designer rather than inferred from the cable voltage rating alone.

A Practical Selection Framework

  1. Confirm the network basis. Record nominal voltage, highest system voltage, frequency, earthing method, and applicable standard.
  2. Describe the route. Identify installation method, route length, burial or duct conditions, ambient conditions, grouping, and mechanical or environmental exposure.
  3. Define electrical duties. Provide load, allowable voltage drop, fault level, protection-clearing time, and any load-cycle information available.
  4. Choose construction requirements. Specify conductor material, insulation, screen, water-blocking, armour, sheath, and any special performance requirements.
  5. Coordinate accessories. Confirm joints, terminations, bonding components, and interfaces with the cable design and installation plan.
  6. Review supplier documentation. Compare datasheets, construction schedules, standards, test documentation, drum lengths, and stated design assumptions.

Common selection mistakes to avoid

A frequent mistake is selecting a conductor cross-section solely by load current without checking short-circuit duty, installation derating, and voltage drop. Another is specifying the cable without defining screen fault-current requirements or the earthing arrangement. Buyers should also avoid treating a product description or voltage label as a substitute for reviewing the full construction and applicable standard.

Commercial enquiries can be delayed when route conditions, required lengths, drum limits, or accessory interfaces are missing. Send a clear cable schedule and identify which requirements are mandatory and which are open to supplier proposal. This gives suppliers a better basis for confirming feasibility and preparing comparable offers.

Pricing, MOQ, and Lead Time Considerations

The price of a 38/66kV cable depends on factors such as conductor material and size, cable construction, requested length, raw-material pricing, testing and documentation requirements, packaging, and delivery destination. A technically lighter construction may not be an acceptable substitute if it fails the project’s electrical or environmental requirements. Compare offers on a like-for-like basis, including the stated scope and exclusions.

Minimum order quantities and lead times vary by supplier, specification, production schedule, and order conditions. We recommend requesting a confirmed production and delivery schedule for the exact construction and quantity rather than relying on a general estimate. For phased projects, ask whether drum lengths and partial deliveries can be coordinated with the installation sequence.

Supplier Evaluation Checklist

  • Can the supplier explain the proposed cable construction against your voltage designation and specified standard?
  • Does the quotation clearly state conductor material, cross-section, screen design, sheath, armour, and water-blocking options?
  • Are current ratings and other calculations accompanied by their design assumptions?
  • Can the supplier provide applicable product documentation and test records for the ordered design?
  • Are drum lengths, packaging, delivery terms, production timing, and accessory scope clearly stated?
  • Is there a defined technical contact for resolving deviations and project questions?

How Zhongdong Cable Co., Ltd. Can Support Your Enquiry

At Zhongdong Cable Co., Ltd., we work with B2B buyers to review 38/66kV cable requirements and prepare a specification-based quotation. Share your voltage designation, applicable standard, conductor preference, route conditions, required length, and project documentation needs so we can assess the enquiry more accurately. Where key information is still under review, identify the open points and request a technical discussion before finalizing the purchase specification.

For a useful first quotation, include the cable schedule, installation method, delivery destination, target delivery window, and any required accessories. We can then clarify the proposed construction and commercial scope for your review. Final design acceptance should remain aligned with the project engineer, network owner, and applicable regulations.

Conclusion

The best 38/66kV high voltage cable is the one that matches the project’s voltage designation, electrical duties, installation route, environmental exposure, and governing standard. Define the conductor, screen, insulation, protective layers, accessories, and documentation requirements before comparing price or lead time. As a next step, prepare a cable schedule and route summary, then send them to Zhongdong Cable Co., Ltd. for a technical review and quotation based on your project requirements.

For more information, please visit 38/66kV High Voltage Cable.

1 0

Comments

Join Us