25-100mm HD LWIR Camera Module: Lens Options, Field of View, and OEM Integration Guide
A 25-100mm HD LWIR camera module combines a long-wave infrared imaging core with a lens selected for the distance, target size, and field of view your system requires. A 25mm lens generally captures a wider scene than a 100mm lens on the same sensor, while a longer focal length enlarges distant targets within the image. The right choice depends on more than focal length: sensor format, resolution, focus method, interface, housing, and operating conditions all affect integration. In this guide, we explain how to compare lens options, estimate field of view, and prepare an effective OEM specification.
Who This Guide Is For
This guide is for OEMs, system integrators, and procurement teams evaluating an HD long-wave infrared camera module for security, perimeter monitoring, inspection, or other protection applications. It is useful if you need to choose between a 25mm and 100mm lens, or a focal length within that range, before requesting a quotation. We focus on practical selection and integration questions rather than assuming one configuration fits every project. Exact module specifications should always be confirmed against the supplier’s current datasheet and project requirements.
How Lens Focal Length and Field of View Work
Focal length describes the optical system’s ability to gather and project light onto the sensor. With the same sensor, increasing focal length narrows the field of view and makes distant objects occupy more pixels in the image. A shorter focal length shows more of the surrounding scene, which can help with broad-area observation. Neither option is universally better; the intended detection distance and target dimensions should guide the choice.
Estimating Field of View
A useful first estimate is: field of view = 2 × arctan(sensor dimension ÷ (2 × focal length)). Apply the formula separately to the sensor’s horizontal and vertical dimensions to estimate horizontal and vertical field of view. For example, assuming a sensor active width of 7.68mm, a 25mm lens gives an estimated horizontal field of view of about 17.5°, while a 100mm lens gives about 4.4°. These are illustrative calculations, not specifications for a particular Hope-Wish module; the actual values depend on the selected sensor and optical design.
Field of View Is Not the Same as Detection Performance
Field of view tells you how much of a scene is framed, but it does not by itself guarantee that a target can be detected, recognized, or identified. Image resolution, pixel pitch, target size, atmospheric conditions, focus, processing, and installation stability can all influence usable performance. Ask suppliers to state the assumptions behind any range or performance estimate they provide. For an OEM evaluation, testing with a representative target and installation setup is more informative than relying on focal length alone.
Lens Options and Configuration Considerations
When comparing a 25-100mm HD LWIR module, identify whether the lens is fixed-focus, manually adjustable, or motorized. Fixed-focus designs can simplify mechanical integration when the observation distance is stable, while adjustable or motorized focus may be useful when scenes vary or remote refocusing is needed. Confirm the focus range, control method, lens dimensions, and any limits on movement or calibration. These details affect both the user experience and the mechanical design of the finished product.
Optical Material and Coatings
LWIR optics require materials that transmit in the camera’s intended long-wave infrared band; visible-light glass should not be assumed to work as an LWIR lens. Germanium and infrared-transmitting chalcogenide materials are examples used in infrared optical designs, but suitability depends on the spectral range, optical prescription, cost, and application. Protective coatings and external windows may also affect transmission and should be assessed as part of the complete optical path. Ask the supplier to identify the offered lens material and any relevant transmission or coating information rather than inferring it from the module category.
Hope-Wish contains other products and information you need, so please check it out.
Match the Lens to the Application
For a wide perimeter view at a relatively short distance, a shorter focal length may cover more area and reduce the number of viewing directions needed. For a narrow view of a distant entrance, boundary, or inspection point, a longer focal length may make better use of the sensor’s pixels on the selected region. Applications that must cover both broad and distant scenes may require multiple cameras, an adjustable optical design, or a different installation strategy. Confirm the expected target size, distance, and acceptable scene width before selecting a lens.
Build an Application Requirement
Start with the smallest target feature that matters, the farthest required observation distance, and the width of the scene that must fit in the image. Add mounting height, viewing angle, expected motion, environmental exposure, and whether an operator or software will interpret the video. These inputs help the supplier assess whether a proposed field of view is plausible for the project. If the application has defined detection or identification criteria, include them in the request rather than using an ambiguous term such as “long range.”
OEM Integration Selection Framework
- Define the imaging task. Specify the target, working distance, scene width, operating environment, and required image output.
- Confirm the sensor and lens pairing. Request sensor resolution, active area or format, pixel pitch if available, focal length, and the resulting horizontal and vertical field of view.
- Choose focus and control requirements. State whether the focus should be fixed, manually adjusted, or controlled remotely, and clarify how the operator or host system will issue commands.
- Map electrical and data interfaces. Identify the host processor, connector constraints, power source, video or data protocol, control signals, and software expectations before mechanical design is frozen.
- Validate the integrated assembly. Check enclosure clearance, thermal conditions, mounting rigidity, window compatibility, sealing needs, and image performance in a representative setup.
Interface compatibility is a common source of avoidable redesign. Do not assume that modules with similar resolutions use the same connector, pinout, control protocol, or software package. Request interface documentation early, and ask which integration materials are available, such as drawings, command references, or sample code. Also clarify whether the lens, sensor core, and any required image processing are supplied as one assembly or as separate items.
Pricing, MOQ, and Lead-Time Questions
Pricing for a long-focal-length LWIR module can depend on the sensor configuration, lens design, focus mechanism, interface, mechanical customization, and order quantity. Minimum order quantities and lead times vary by configuration and production schedule, so they should be confirmed directly with the supplier. A standard configuration may follow a different quotation and delivery process from a customized OEM design. For a useful comparison, ask suppliers to quote the same specification and identify any one-time engineering or tooling costs separately.
Supplier Evaluation Checklist
- Can the supplier provide a datasheet that matches the quoted sensor and lens configuration?
- Are focal length, field of view, focus method, and optical material clearly stated?
- Are power, connector, data interface, control method, and mechanical dimensions documented?
- Can the supplier review your target distance, scene width, and installation constraints?
- Are customization scope, sample availability, MOQ, lead time, warranty terms, and support responsibilities confirmed in writing?
Hope-Wish works with buyers evaluating thermal imaging modules and OEM requirements for security and protection products. When you contact us, provide your intended application, target distance, scene width, preferred focal length, host interface, and any enclosure constraints. This information helps us assess the requested configuration and identify which specifications require confirmation. We recommend agreeing on the module details and validation criteria before committing to a production design.
Key Takeaways and Next Steps
- A 25mm lens typically provides a wider view than a 100mm lens when used with the same sensor.
- Field of view depends on both focal length and sensor dimensions; calculate horizontal and vertical values from the actual configuration.
- Lens material, focus method, interfaces, mechanics, and environmental requirements all affect OEM suitability.
- Use application-specific inputs and written supplier documentation to compare quotations, MOQ, and lead time.
To choose a 25-100mm HD LWIR camera module, first define the target and scene you need to observe, then match the sensor and lens to the required field of view. Treat example calculations as planning aids, not confirmed product specifications, and verify the complete optical and electrical configuration with your supplier. As a next step, prepare a short requirement sheet covering distance, target size, scene width, focus, interface, and installation conditions. Share it with Hope-Wish to discuss a suitable OEM configuration and the information needed for evaluation.



Comments
All Comments ( 0 )